62
en | Navigating the Menus
AutoDome Easy IP
F01U079609 | 1.0 | 2008.08
Installation Manual
Bosch Security Systems, Inc.
finished, toggle to the Aux Control tab and press 5 + Aux
Off.
10. Press the down arrow via the on-screen joystick to select
END POINT.
11. Press the Aux Control tab then press 5 + Aux On via the on-
screen keypad to gain access of the CONTROL. Toggle
back to the View Control tab and use the on-screen
joystick to select the camera’s pan ending point. When
finished, toggle to the Aux Control tab and press 5 + Aux
Off.
12. When satisfied, select SAVE AND EXIT.
To exit without saving, select EXIT W/O SAVE.
10.3.2
Run Auto Pan
The AutoDome Easy IP is designed to display a customized auto
pan between limits. To run the auto pan feature, proceed as
follows:
1.
Press the Aux Control tab then press 3 + 0 + (auto pan
number) + Show Shot via the on-screen keypad. For
example, to run the auto pan for course 4, press 3 + 0 + 4 +
Show Shot.
2.
To stop the auto pan, toggle to the View Control tab and
move the on-screen joystick.
Note: This is invalid if in Menu mode.
10.4
Sector Menu
The sector function provides access to customizing individual
sectors and titles. The factory default is eight (8) evenly spaced
sectors with titles from SECTOR1 to SECTOR8.
i
NOTICE!
Two (2) shortcuts are available for auto pan.
Press 1 + Aux On to activate a continuous pan back and forth
between 0 and 359 degrees starting at the current tilt and zoom
positions. To stop, press 1 + Aux Off.
Press 2 + Aux On to activate auto pan 1. Note: Start point, tilt
and zoom, and end point must all be set.
Summary of Contents for VEZ IP Series
Page 1: ...AutoDome Easy IP VEZ IP Series en Installation Manual ...
Page 2: ......
