AutoDome Easy IP
Configuring IP Communications | en
41
Bosch Security Systems, Inc.
Installation Manual
F01U079609 | 1.0 | 2008.08
2.
Next, click CCTV Download LibrarySoftware CCTV Camera
PTZ and download the appropriate software (Sun Java,
Microsoft .NET 2.0, and DirectX 9.0c).
3.
Install each program by following the on-screen
instructions in the following order:
–
. Sun Java
–
. Microsoft .NET 2.0
–
. DirectX 9.0c
8.6
Changing the Network Settings/IP
Address
The IP module has a default IP address of 192.168.0.1. To
change the IP address or any network settings, you can use the
Configuration Manager software available at
www.boschsecurity.com or the AutoDome Easy IP web server.
8.6.1
Installing the Configuration Manager
The Configuration Manager is an optional network utility that
enables the user to set specific parameters for the AutoDome
Easy IP. To install the Configuration Manager software, proceed
as follows:
Download the Configuration Manager and .NET Framework
(if required) from www.boschsecurity.com and follow the
on-screen instructions. Note: If required, .NET 2.0 must be
installed before the Configuration Manager.
8.6.2
Using the Configuration Tool
To use the configuration tool, proceed as follows:
i
NOTICE!
Contact your local network administrator for a valid IP address,
subnet mask, and gateway IP address.
If there are multiple domes on the network, it is easier to set
the network settings using the Configuration Manager tool.
Summary of Contents for VEZ IP Series
Page 1: ...AutoDome Easy IP VEZ IP Series en Installation Manual ...
Page 2: ......
