Solution 64 | Installer Guide | Input Programming
7-2
Bosch Security Systems | 11/05 | BLCC110I
The keypad will display the following zone array information
for Zones 97 to 112.
9990000000000111 1
7890123456789012 0
---------------- 0
Press
OK or MENU
The keypad will display the following zone array information
for Zones 113 to 128.
1111111222222222 1
3456789012345678 0
---------------- 0
Press
OK or MENU
When finished press [OK] or [MENU] to exit.
Inputs > Commands >
Bypass Zones
-
-
MENU 3-0-2
This menu allows users with the appropriate access level to
manually bypass zones effectively removing them from the
area for the current arming cycle. All zone types including
24hour zones can be bypassed.Bypassed zones will be reset
when the area is turned off or disarmed.
Enter [MENU] + [3] + [0] + [2]. A list of zones that can be
bypassed will display on the keypad. A tick displayed on the
right side of the zone name indicates that the zone is already
bypassed.
Zn001 Zone 1 Name
Zn002 Zone 2 Name
Zn003 Zone 3 Name
Press
OK or MENU
Using the up and down arrow keys highlight the zone that you
want to bypass, then press [OK]. Alternatively, you can enter
the zone number that you want to bypass, then press [OK]. If
the zone is bypassed, the keypad will prompt:
Zone 1 Name Zn001 is
bypassed. To un-bypass
Press OFF.
Press OK or MENU
If the zone is not bypassed, the keypad will prompt:
Zone 1 Name Zn001 is
un-bypassed. To bypass,
Press ON.
Press OK or MENU
Press [ON] or [OFF] to toggle the zone(s) bypass state then
Press [OK] to save and exit or press [MENU] to exit without
saving.
Repeat steps 1 to 4 to bypass or un-bypass additional zones.
3)
4)
5)
1)
2)
3)
4)
5)
Inputs > Commands >
Set Chime Zones
-
MENU 3-0-3
This menu allows you to program zones to be monitored when
chime mode is activated. Chime mode is ideal for monitoring
a front door in a shop, a pool gate or other entrance points.
To sound the keypad buzzer when a chime zone is opened
(faulted) See MENU 6-1-5 — Beeper Options. To activate
Chime mode enter PIN + [MENU], select the Commands option
and use the arrow keys to scroll to the Chime On/Off menu.
Chime mode only works when the area is disarmed.
Enter [MENU] + [3] + [0] + [3] and use the up and down arrows
to highlight the area from the list then press [OK].
Use the up and down arrow keys to highlight the zone(s) you
want to program as Chime Zones then press [OK].
Alternatively, you can enter the zone number directly then
press [OK]. A tick mark displayed on the right side of the zone
name indicates that the zone is already set for chime.
Zn001 Zone 1 Name
Zn002 Zone 2 Name
Zn003 Zone 3 Name
Press
OK or MENU
One of the following messages will be displayed depending on
the current zone programming.
Zone 1 Name Zn001
Zone Chime is OFF
To turn ON, Press ON
To Go Back Press OK
Zone 1 Name Zn001
Zone Chime is ON
To turn OFF, Press OFF
To Go Back Press OK
Press [ON] or [OFF] to toggle the zone to be monitored when
Chime Mode is turned on then press [OK] to save and exit or
[MENU] to exit without saving.
1)
2)
3)
4)
