Solution 64 | Installer Guide | Access Programming
Bosch Security Systems | 11/05 | BLCC110I
5-7
Using the numeric keys, enter the Timer Group. Valid entries
are 1 – 8 or 0 to disable.
Timer Group Ur001
00
Press 0-9 OK to SAVE
0-9 OK to SAVE
Press [OK] to save and exit or press [MENU] to exit without
saving.
Access > User Properties >
Access Assignment
-
MENU 1-4-5
1
Access Group 1
N
2
Access Group 2
N
3
Access Group 3
N
4
Access Group 4
N
5
Access Group 5
N
6
Access Group 6
N
7
Access Group 7
N
8
Access Group 8
N
This menu allows you to assign each user to one or more
access groups. An access group is used to allow and/or restrict
which users have access to various system outputs. These
outputs can be used to control door strikes etc.
Enter [MENU] + [1] + [4] + [5] and select the user from the list
then press [OK].
Ur001 John Smith
Ur002 Debbie Smith
Ur003 User 3 Name
Press
OK or MENU
Use the up and down arrow keys to highlight the Access Group
then press the [ON] key to select or the [OFF] key to deselect.
Access Group 1
Access Group 2
Access Group 3
Press
OK ON OFF MENU
Repeat Step 2 until all required Access Groups are
programmed, then press [OK] to save and exit or press [MENU]
to exit without saving.
Access > Global Properties >
PIN Length
MENU 1-5-0
0 = Variable
4
1 = 1 Digit
4 = 4 Digits
7 = 7 Digits
2 = 2 Digits
5 = 5 Digits
8 = 8 Digits
3 = 3 Digits
6 = 6 Digits
(*** System Wide Parameter ***)
At factory default, all User PINs are set to be 4 digits long. This
menu allows you to change the length for all PIN codes.
If you select the Variable code length option then you are free
to create pin codes with different code lengths. For example
User 1 could have a 4 digit code while user 3 can have an 8
digit code.
2)
3)
1)
2)
3)
Variable pin lengths are useful for increasing security levels.
Another use would be to program a single digit code to trigger
an output. To do this create a code which is not assigned to an
area and then map this to the required output.
Enter [MENU] + [1] + [5] + [0]. The keypad will display the
current PIN length.
PIN Length
04 - 4 Digit Length
Press 0-9 OK to SAVE
0-9 OK to SAVE
Select the required PIN length using the up and down arrow
keys then press [OK] to save and exit or press [MENU] to exit
without saving.
Access > Global Properties >
PIN Retry Count
MENU 1-5-1
(*** System Wide Parameter ***)
6
This menu sets how many times an invalid PIN can be entered
before the keypad will be quarantined or locked out.
See MENU 6-1-8 — Keypad Lockout Time to set the lockout
time period.
An Access Denied report will be sent to the base station when
the keypad is quanrantined. If keypad lockout is not required
set this option to 0.
The PIN retry count is reset every time the corresponding area
is turned All On, Part On or Off.
Enter [MENU] + [1] + [5] + [1]. The keypad will display the
current PIN retry count.
PIN Retry Count
06
Press 0-9 OK to SAVE
0-9 OK to SAVE
Enter the required PIN Retry Count using the up and down
arrow keys then press [OK] to save and exit or press [MENU] to
exit without saving. Valid entries are 1 - 15 , 0 = Unlimited.
Access > Global Properties >
Installer PIN
MENU 1-5-2
(*** System Wide Parameter ***)
1
2
3
4
This menu sets the Installer PIN. The Installer can access all
menu functions and can also disarm one or multiple areas. The
Installer PIN Can Be Up To 8 Digits Long.
The factory default Installer PIN is 1234.
Enter [MENU] + [1] + [5] + [2]. The keypad will display the
current Installer PIN.
Installer PIN
1234
Press
0-9 OK to SAVE
1)
2)
1)
2)
1)
