RE 30139-B/12.14 | VT-HNC100...X
Bosch Rexroth AG
45/
48
Extension and conversion
recovered by means of special separation procedures as well. If the products
contain batteries or accumulators, these have to be removed before recycling and
furnished to the battery recycling, if possible.
12 Extension and conversion
The VT-HNC100...3X may neither be extended nor converted. If you convert the
VT-HNC100...3X, warranty will expire.
13 Troubleshooting
13.1 How to proceed with troubleshooting
•
Always work systematically and focused, even when under time pressure.
Random and imprudent disassembly and readjustment of settings might, in the
worst-case scenario, result in the inability to restore the original error cause. By
readjusting parameters, the drive units operate in an uncontrolled or vibrating
manner or do not operate at all due to changed command values, or that they
react in any other unexpected way.
•
First get a general idea of how your product works in conjunction with the entire
system.
•
Try to find out whether the product has worked properly in conjunction with the
entire system before the error occurred first.
•
Try to determine any changes of the entire system in which the product is
integrated:
– Were there changes to the product's operating conditions or operating range?
– Were there any changes or repair works on the entire system (machine/
system, electrics, control) or on the product?
If yes: What were they?
– Was the product or machine used as intended?
– How did the malfunction become apparent?
– Try to get a clear idea of the cause of the fault. Directly ask the (machine)
operator.
•
For troubleshooting, you can use the diagnosis options of WIN-PED® 6 or 7.
The diagnosis and failure messages can optionally be read out via field bus.
If you could not remedy the occurred fault, please contact one of the addresses
you find at
http://www.boschrexroth.com
or in the address directory in the
annex. In case of WIN-PED® software failures, you can visit the website
www.
boschrexroth.com/hnc
. Here, software updates or occurred faults and their
remedy are explained.
