RE 30139-B/12.14 | VT-HNC100...X
Bosch Rexroth AG
13/
48
Information on this product
The preparation of user-specific data sets forms the basis for the function of the
VT-HNC100...3X. These data sets are created on the PC and submitted to the
VT-HNC100...3X via the serial interface or optionally the TCP/IP. The connection
between user program and data sets is referred to as project.
The VT-HNC100...3X includes different controller functions which are described in
the data sheet.
Technical data, operating conditions and the limitation of use of the
VT-HNC100...3X axis control are available in the data sheet.
4.3 Product identification
Fig. 2: Order code
VT-HNC100
= Serial unit
Version Compact for 1 axis
= C
Version for 1 hydraulic axis
= 1
Version for 2 hydraulic axes
= 2
Version for 3 hydraulic axes
= 3
Version for 4 hydraulic axes
= 4
Component series 30 to 39
= 3X
(30 to 39: unchanged technical data and pinout)
Option
000 =
without synchronization
G02 =
Synchronization 2-axis version
G03 =
Synchronization 3-axis version
G04 =
Synchronization 4-axis version
00 =
No fitting
E0 =
TCP/IP
1)
Position transducer
I =
Incremental/SSI
(not in connection with Compact version)
S
=
SSI
(only in connection with Compact version)
Bus connection
2)
P =
PROFIBUS DP
C =
CANopen
N =
PROFINET RT
(not in connection with Compact version)
E =
EtherNet/IP
(not in connection with Compact version)
VT-HNC100
3X
1)
Only specify “E0” if the Ethernet service interface is desired
for “PROFIBUS DP”
2)
Versions without bus connection are not available.
