Bosch Rexroth PSI 6100 L1 Series, Operating Instructions Manual

Page: 291 / 460

1070080028 / 08 Bosch Rexroth AG PSI 6xxx | 291 /460
Information on this product
Reset faults
1.
Press the "Enter" key.
The display now shows "Err Quit".
2.
Press
the "ESC" key to cancel acknowledgement, or
the "Enter" key to acknowledge the fault.
Activate Boot mode
NOTICE
Arbitrary activation of the boot mode
Possibility of negative effects on the ongoing production!
"
Do not ever activate the boot mode during ongoing production.
"
The boot mode may be activated by authorized personnel only.
The timer aborts the program sequence, resets all signal outputs
and goes into the ”boot” mode (for firmware upgrade).
" Press the "ESC" and "Enter" keys simultaneously.
The display shows "Boot! x".
x: seconds remaining until boot mode is activated.
Within the time remaining, activation of this function can be aborted
by releasing the keys.
Initiate timer reset
NOTICE
Arbitrary activation of WT reset
Possibility of negative effects on the ongoing production!
"
Do not ever activate WT reset during ongoing production.
"
WT reset may be activated by authorized personnel only.
When timer reset has been activated, welding is no longer possi­
ble until the timer has completely booted! The timer cancels pro­
gram execution and resets all signal outputs.
" Press the
B
and "Enter" keys simultaneously.
The display shows "Reset! x".
x: seconds remaining until timer reset is activated.
Within the time remaining, activation of this function can be aborted
by releasing the keys.
English