Bosch Rexroth PSI 6100 L1 Series, Operating Instructions Manual

Page: 282 / 460

1070080028 / 08 Bosch Rexroth AG PSI 6xxx | 282 /460
Information on this product
5.2.4.2 AnyBus module ”CC Ethernet 100 Mbit”
Features:
•
Suitable for PSI 6xCx.xxx (slot X7E1)
• Fast Ethernet (100 Mbit/s), full-duplex mode
• Available as 1-port or 2-port variant. 2-port variant with integrated
switch
• Integrated WEB server
• Simple IP configuration
Function:
•
For the simultaneous connection of several timers to the host level
via Ethernet (e.g. connection BOS programming terminal).
2
1
3
4
5
ETH1
Fig.10: AnyBus module ”CC Ethernet 100 Mbit” (1-port variant)
1 Fastening screws
2 NS LED: Network status.
Off: No power supply or no IP address
Green The module is active or in wait mode
Green, flashing Waiting for connection
Red Double IP address or fatal event
Red, flashing Module not active
3 Ethernet interface. RJ45 female connector
4 LINK LED: Connection status.
Off No connection, no activity
Green Connection established
Green, flickering Data transmission active
5 MS LED: Module status.
Off No power supply
Green Normal function
Red Severe error or fatal event
Red, flashing Light error
For information on installation, refer to Section 13.2.1 from
page 416.
Use the "Anybus IPconfig" software for the configuration of the
Ethernet (installation file is included in the BOS software package,
refer to BOS data medium: directory path "Tools/Anybus”).
English