35 / 50
MS2S
Electrical connection
Bosch Rexroth AG
R911410077, Edition 01
Change the output direction a maximum of ten
times and do not exceed the specified adjust-
ment torques and the angle of rotation.
The theoretical setting range is shown below.
Adjustment range single cable connector
SpeedTec M17
Adjustment torque
4
…
9 Nm
Connect plug-in connector of ready-made
hybrid cable.
1.
Check the power wire cross-section of the
ready-made hybrid cable (RHB2). Laying
type, rated current I0_100K
2.
Insert plug-in connector and lock the
SpeedTec locking by turning clockwise.
3.
Secure the hybrid cable against vibrations.
🡆
Motor is ready for operation from an
electrical engineering point of view.
7.3.4
SpeedTec connector
WARNING
Risk of personal injury or damage to property
due to disconnecting or connecting live plug con-
nections!
−
Only disconnect or connect plug connec-
tions when they are dry and de-energized.
−
During operation of the system, all plug con-
nections must be firmly locked or screwed
tight.
Observe when connecting the flange sockets:
•
Protect the device connectors from external
force effect.
•
Connect the motor to ready-made connec-
tion cables.
Connect SpeedTec connector
Material:
•
Hybrid connector, size M17 (RHS1701/
CM07)
Before connecting, please ensure properly meas-
ured ready-made connection cables are available.
The type, size and cable cross section of the plug-
in connector must be adjusted to the motor.
1.
Code and mount the connector
2.
Attach the connector
As
sembl
y
