Bosch Rexroth MS2S, Operating Manual, Page: 16 / 50

16 / 50 MS2S
Important directions on use
Bosch Rexroth AG R911410077, Edition 01
Meaning of symbols
Table 3: Meaning of symbols
Symbol Meaning
Reference to supplementary docu-
mentation
The UL Recognized Component
Mark identifies recognized compo-
nent parts which are components
of a bigger product or system.
The letters “C” and “E” stand for
“Communautes Européennes”. The
CE-marking expresses the con-
formity of a product with relevant
EC-regulations.
Components for the use in systems
for “integrated safety technique”
prepared.
The symbol indicating "separate
collection" for all batteries and
accumulators is the crossed-out
wheeled bin.
Markup
The following markups are used for a user-
friendly text information representation:
Reference to supplementary documentation
Remark: This note gives important informa-
tion, which must be observed.
•
Listings on the first level contain a bullet
point
– Listings on the second level contain a
dash
Instruction
Instruction
🡆
Result of one instruction
Instruction multilevel
1. Action step one
2. Action step two
🡆
Result of an instruction
Please comply with the order of the handling
instructions.
Trademark information
ctrlX®, ctrlX DRIVE®, ctrlX SENSE® are registered
trademarks of Bosch Rexroth AG
SpeedTec® is a registered trademark of the
TE Connectivity Ltd.
2 Safety instructions
Observe the general safety notes in this chapter
and the safety instructions in this documentation.
Therewith, you avoid personal danger, damage
and errors.
Remark: This operating instruction must be
stored and transferred in case of sale during the
complete product lifetime.
2.1 Important directions on
use
2.1.1 Intended use
Prerequisites for proper and safe use of the
motors are proper transport, appropriate
storage, proper assembly and connection,
careful maintenance, operation and overhaul.
The motors have been designed for installation in
industrial machinery. The motors have been
designed and manufactured in compliance with
the EU directives and harmonized standards
specified in the following.
Standards
EN 60034-1 Rating and performance
behavior
EN 60034-5 Type of protection
Directives
2014/35/EU Low voltage directive