12
Use up/down arrow to navigate and press
SELCT
to load the desired parameter file.
Once confirmed all the parameters will be refreshed in the memory. To save the loaded parameters, it needs to
enter the setup screen and exit normally.
8.5 Save logging data to USB
When truck is stopped, Press
TOTAL
first, then press
DATA,
insert log key and follow the hints on screen.
Except save/load parameters between USB and controller, Press
LOG
can also save all spreading log on the
USB with file name including region and truck names. The text “SAVING…” will be gone after system saving the
spreading log on the USB and clear it on the controller.
9
SUB Menus
9.1
SPEED SIMULATION
When truck is stopped, press go to the screen as below.
Press
SMSPD
to enter the screen of speed simulation.
Load REGION_REX01?
YES NO
SIM
STOP
