6
en
Overview
Overview
Please fold out the illustrated pages.
Fig.
A
:
Base unit
1 Release button
2 Swivel arm
“Easy Armlift” function to support
the upward movement of the arm
(see “Work positions”).
3 Rotary switch
When the appliance has been switched
off (position
P
), the appliance runs
automatically to the optimum position for
changing the tools.
P
= Stop
M
= Instantaneous switching at
maximum speed, hold switch for
required blending duration.
Settings
1-7
, Operating speed:
1
= low speed – slow,
7
= high speed – fast.
4 Operating indicator
Is lit while the appliance is operating
(rotary switch on
M
or
1-7
). Flashes
if the appliance has been operated
incorrectly, the electronic fuse has
tripped or the appliance is defective –
see section “Troubleshooting”.
5 Drive cover
To remove the drive cover, press on the
rear area and remove cover.
6 Drive for
–
Continuous-feed shredder
and
–
Citrus press
When not in use, attach the drive cover.
7 Drive for tools
(stirrer, whisk,
kneading hook)
and mincer
8 Blender drive cover
9 Drive for blender
When not in use, attach the
blender drive cover.
10 Cord store
Stow the cord in the cord store
Bowl with accessories
11 Stainless steel stirring bowl
12 Lid
Tools
13
Professional flexi stirring whisk
14 Professional beating whisk
15
Kneading hook with dough deflector
16 Accessories bag
For storage of the tools and
cutting discs.
Continuous-feed shredder
17 Pusher
18
Cover with filling shaft
19 Cutting discs
a
Reversible slicing disc – thick / thin
b
Reversible shredding disc –
coarse / fine
c
Grating disc – medium-fine
d
Grating disc coarse
20 Disc holder
21 Housing with outlet opening
Blender
22 Blender jug
23 Lid
24 Funnel
Operating positions
Fig.
B
:
Attention!
Before operating the appliance, attach the
tool / accessory to the correct drive and
in the correct position and place in the
operating position according to this table.
The swivel arm must be engaged in every
operating position.
Note:
The swivel arm features an “Easy Armlift”
function which supports the upwards
movement of the swivel arm.
Selecting the operating position:
■ Press the Release button and move the
swivel arm. Support movement with your
hand.
■ Move the swivel arm until it engages in
the required position.
