12/62
Bosch Rexroth AG
Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
6.3
Mounting conditions
X
Take note of the operating conditions
!
17 and the catalog.
X
For special operating conditions, please contact us.
X
The product can generally be installed in any position.
NOTES
NOTICE
Risk of damage due to improper loads!
Damage to the product.
f
Do not attach any projecting loads.
6.1
Unpacking the product
1.
Before hoisting the product, note the weight
!
Catalog.
2.
Take the product out of the packaging and remove the packing material.
3.
Dispose of the packing material according to the local regulations in your country.
6.2
Required accessories
f
Required fastening accessories
!
Catalog.
f
Use suitable screws for fastening.
NOTES
Risk of product loosening or warping due to improper fastening.
Damage to the product.
f
Fasten the product using the recommended fastening elements.
f
Do not secure or support the product at the end plates.
f
Observe specified tightening torques.
f
Observe the maximum permissible deflection f
max
(please refer to the diagrams in the catalog)!
If high system dynamics are required, supports (B) must be provided every 300 mm
.
f
When mounting to the frame, keep a minimum distance of 5 mm from the end plates
!
Fig.6
.
Fig� 6:
Minimum distance to the end plates / maximum permissible deflection
6.4
Fastening the product to the adjoining structure
A
B
min. 5 mm
f
max
F
300 mm 300 mm 300 mm 300 mm
