Bosch MKK-040 Instructions Manual Download Page 40

Page: 40 / 62

13.5

Initial lubrication MKx-NN-3

40/62

Bosch Rexroth AG

Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08

Lubrication version LSS:

Initial lubrication carried out by Bosch Rexroth.

Linear modules (MKx-165-NN-2) come with initial greasing with Dynalub 510 and are only designed for grease

lubrication using a manual grease gun.

Lube version LCF and LCO:

Specified quantities applied at lube fittings.

Lubrication version LPG:

For the ideal distribution of the lubricant in the ball rail system as well as the ball screw assembly, the basic

lubrication takes place in three partial quantities. After each lubrication with a partial quantity (TM), the

carriage (TT) of the linear axis is moved with three double strokes. The double stroke should be larger than 3

times the carriage length.

Procedure for the basic lubrication:

Pre-lubricate the linear module with a partial quantity 1 (TM1) by slowly applying pressure to the grease gun.

Move the carriage three times with the double stroke (DH) at a slow speed (<0.5 m/s).

Pre-lubricate the linear module with a partial quantity 2 (TM2) by slowly applying pressure to the grease gun.

Repeat steps 2 and 3.

Fig� 37:

Double stroke

Pay attention to the notes on lubrication

Lubricants

13.3

Lube fittings

13.4

Note the operating conditions

Summary of Contents for MKK-040































































Search results

Summary of Contents for MKK-040

Reviews:

Related manuals for MKK-040

Brands by name

Popular brands

Bosch MKK-040, Instructions Manual

Search results

Summary of Contents for MKK-040

Reviews:

Related manuals for MKK-040

Brands by name

Popular brands