1
2
3
1
Fig� 25:
MKK drive versions
24/62
Bosch Rexroth AG
Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
NOTES
Risk of excessive torque and rotary speed if limits are not observed!
Avoid tension due to the weight of the motor when mounting the motor!
Damage to the product.
f
Observe the specified limits. Technical data and limits
!
Catalog.
7
Mounting the MKK drive
7.1
Mounting the motor with flange and coupling
The screw journal of the product and the motor journal must be completely free of grease and oil before
mounting.
Observe the tightening torques
!
1.
Push the flange (
2
) into the centering on the product and screw down onto the end plates (
5
) using four
screws (
3
) and tightening torque M
A1
.
2.
Insert coupling (
1
) into the flange (
2
) on the screw journal (
4
) of the product and set dimension A
1
.
3.
Tighten the mounting screws (
6
) to tightening torque
MA2
.
4.
Push the motor into the centering ring from the flange and coupling and using four screws (
7
) tighten to
tightening torque
M
A1
.
5.
Tighten the motor-side mounting screws (
8
) of the coupling with the specified tightening torque
MA
2
.
6.
If necessary, release the motor brake and move the carriage so that the screw journal turns.
Drive versions:
• Flange and coupling (
2
) with motor (
1
)
• Timing belt side drive (
3
) with motor (
1
)
