20/62
Bosch Rexroth AG
Linear modules MKK/MKR-xxx-NN-3 | R320103169/2020-08
4
Switching cams (for mechanical switch and
proximity sensors)
5
Mounting channel / cable channel
Assembling the switch / sensor
1.
Hang the switch with the switch mounting plate into the corresponding slot in the frame, set the switch to the
desired switching position and secure it with set screws.
2.
Set the switching point and switching interval by adjusting the switches and the switching cam.
(Observe the adjustment between switch and switching cam).
3.
Tighten the bolts and set screws at the switching cam and switches.
6.5.7
Mounting the switching cam
6.5.8
Overview of mechanical switches, proximity sensors, socket-plugs, cable channel
switching cams
1
X
2
3
5
4
f
The mechanical switches, the proximity sensors and the box with connector and cable channel are fastened
with attachments in the respective slots of the frame. Switch activation for mechanical switches and
proximity sensors is carried out by a switching cam (
4
) on the carriage.
f
Fasten the switching cam onto a carriage!
Fig� 20:
Mounting the switching cam
Fig� 21:
Overview of mechanical switches, proximity sensors, socket-plugs, cable channel, switching cams
1
Socket and plug
2
Mechanical switch with attachments
3
Proximity sensor with additional components
