|
Description of unit | KTS 515 | 15
en
1 689 989 232
2019-01-04
|
Robert Bosch GmbH
3.4.3
Functions of LEDs A and B
Status
LED A
LED B
KTS 515 ready for
operation
Does not
illuminate
Flashes green
(1 second interval)
Data communication
with the controller
Flashes green
(irregular)
Flashes green
(1 second interval)
Firmware update
in operation
Does not
illuminate
Flashes red
(irregular)
LED A
Function
Measures
Does not
illuminate
No data
communication with
the controller
Check connection
with the controller
Flashes green
(irregular)
Data communication
with the controller
None
Illuminated green
Fault in hardware/
Firmware
*)
Illuminated red
Power supply
> 35 Volt.
Check voltage in
vehicle
LED B
Function
Measures
Does not
illuminate
Voltage not present
Check power
supply
Flashes green
(1 second
interval)
KTS 515 ready for
operation
None
Illuminated green
Fault in hardware/
Firmware
*)
Flashes yellow
(1 second
interval)
Overvoltage on
diagnostic cable
*)
Illuminated yellow Fault in hardware/
Firmware
*)
Flashes red
(irregular)
Firmware update
in operation
None
Illuminated red
Fault in firmware-
update
Repeat firmware
update
*)
Unplug the USB connection and power supply and connect them
again. If the error still exists, contact customer service.
3.4.4
Adapter insert (IBOX 01)
The adapter insert (fig. 3, item 4) contains all of the
existing capabilities for establishing communication
with the vehicle diagnosis interfaces that are known. In
order to flexibly adapt to future expansions in diagnosis
protocols, the adapter insert can be changed quickly
without any tools.
i
KTS modules only function with the adapter insert
connected.
3.3
Scope of delivery
i
The scope of delivery depends on the product variant
ordered as well as the special accessories ordered,
and can deviate from the following list.
Designation
Order number
System tester KTS 515
–
Bluetooth USB adapter
–
OBD diagnostic cable 1.5 m
1 684 465 555
USB connecting cable 3 m
1 684 465 562
Power supply unit
1 687 023 693
Software package
1 687 005 086
Case
1 685 438 648
Mount
with self-tapping screw (2x)
and oval head screw (3x)
–
Product description
1 689 989 232
3.4
System tester
3.4.1
Diagnosis panel
DIAG
459802_12-Ko
1
Fig. 1:
Diagnosis panel
1 OBD diagnostic cable connection (DIAG)
3.4.2
Connection panel
15V
459908_01_We
Fig. 2:
Connection panel
1 Power supply unit connection
2 LED A and LED B (refer to Section 3.4.3)
3 USB connection
