Bosch Intellic EFAS-4.10, Workshop Manual

Page: 48 / 115

38
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
8.4.1 RDI

Printout of RDIs of current vehicle adjustment
The printing of RDIs of current vehicle adjustment can only be done in calibration mode or in the unactivated mode of the EFAS
Tachograph.

26/04/2020 15:20 (UTC)
Time of printout
-----------

------------
RDI

Type of printout
-----------

------------
Start of section: Vehicle ID
1

XAD1117483A
VIN (Vehicle identification number)
D/B-M 4711
RMS / VRN
-RDI:- Data --------------
FD34: B1
FD3A: B1
FD00: B1
FD01: B1 B2 B3 B4
Byte 1 to byte 4
FD02: B1 B2 B3 B4
FD6E: B1
F90C: B1
F920: B1
FD26: B1 B2 B3 B4
FD9E: B1 B2
Byte 1 to byte 2
FDA3: B1
FDC6: B1 B2
FD52: B1
FD53: B1
FD69: B1 B2 B3 B4
Byte 1 to byte 8
B5 B6 B7 B8
-----------

------------
DSRC - Remote Communication Facility
2
Status: 2 / CAN Aux. DSRC Status / connected via CAN
Serial Number:
Serial Number
3
1234567890ABCDE
Version: 0 2.16.1 0.6.16
Hardware Version
4
Date: 04/2020
Production Date;
-----------

------------
GNSS
Fix Mode: 2
Fix Mode
5
Precision: 14
Accuracy := HDOP*10
Lat: + 52° 34.7‘
Latitude
6
Lon: +013° 18.5‘
Longitude
6
------------------------
S32, S33, S34,S88, S89,
List of active SrvIds that are important for error analysis
S176, S177, S178, S179,
S48
for the intellic support team.
1 If the data for block 4 does not exist, question marks are printed instead of the data.
2 If there is no connection to the DSRC module, „DSRC Facility: not available“ is printed.
3 If the serial number plus description is longer than one print line, the text is printed in two lines.
4 If the version plus description is longer than one print line, the text is printed in two lines.
5 1 -> Fix not available
2 -> 2D-Fix (< 4 SVs used)
3 -> 3D-Fix (>= 4 SVs used)
6 If FixMode =1, there is no GNSS position aivailable. In this case, “unknown” is printed in the current setting of the local language.