6 720 643 256 (2010/05)
Operation
|
29
US/CA
B
Press the dial
, the display changes to
the Vacation menu and
Start
is selected.
Now you can enter the date on which you want
the vacation program to start. Enter the year,
month and day one after the other and
confirm your entry in each case by pressing
the dial
.
B
Turn the dial
so that
End
is selected.
B
Press .
Now you can enter the date on which you want
the vacation program to end. Enter the year,
month and day one after the other and
confirm your entry in each case by pressing
the dial
.
Programming of the vacation program is now
complete. If required, you can adjust the heating
and domestic hot water modes. The following
operating modes are set in the factory settings:
•
Heating circuit 1
: Operating mode
Frost
.
•
Heating circuit 2
: Operating mode
Frost
.
•
Domestic hot water
: Operating mode
Off
1)
or
60 °F
(
15 °C
)
2)
.
•
DHW recirculation pump
:
Off
mode.
•
Thermal disinfection
:
Off
mode.
When the vacation program is active, the
standard display shows
and the dates, e.g.
VACATION UNTIL
09/30/2010
(30.09.2010).
To cancel the vacation program early:
B
Select menu option
Vacation > Start
.
B
Press the dial
and then press
.
The display shows
--/--/----
(--.--.----).
B
Press the dial
to store the setting.
If you have set the vacation
program to start on today's date, it
will start immediately. If the date is
in the future, the vacation program
will start at 12:00am (00:00) on the
set start date.
It will end at 11:59pm (23:59)
hours on the set end date.
1) DHW heating with combi boiler
2) DHW heating via hot water tank
