Bosch FLEXIDOME corner 9000 MP Software Manual Download

Page: 15 / 108

Camera Browser Interface

Operation via the browser | en

Bosch Security Systems

Software manual

AM18-Q0649 | v5.8 | 2013.06

3.1.2

Status icons

Various overlays in the video image provide important status

information. The overlays provide the following information:

Decoding error

The frame might show artefacts due to decoding errors. If other

frames reference this frame, they might also show decoding

errors but won’t be marked with the icon.

Alarm flag

Shown on a media item to indicate an alarm.

Communication error

A communication error, such as a connection failure to the

storage medium, a protocol violation or a timeout, is indicated

by this icon. An automatic reconnection procedure is started in

the background to recover from this error.

Gap

Indicates a gap in the recorded video.

Watermark flag

Watermark is set on media item.

Invalid watermark flag

Indicates that the watermark is not valid.

Summary of Contents for FLEXIDOME corner 9000 MP













































































































Search results

Summary of Contents for FLEXIDOME corner 9000 MP

Reviews:

Related manuals for FLEXIDOME corner 9000 MP

Brands by name

Popular brands

Bosch FLEXIDOME corner 9000 MP, Software Manual

Search results

Summary of Contents for FLEXIDOME corner 9000 MP

Reviews:

Related manuals for FLEXIDOME corner 9000 MP

Brands by name

Popular brands