86
en | Setting up VCA
Camera Browser Interface
AM18-Q0649 | v5.8 | 2013.06
Software manual
Bosch Security Systems
12.3
VCA - Scheduled
A scheduled configuration allows you to link a VCA profile with
the days and times at which the video content analysis is to be
active.
In the
VCA configuration
drop-down list, select
Scheduled
.
Schedules can be defined for weekdays and for holidays.
The current alarm status is displayed for information purposes.
12.3.1
Weekdays
Link any number of 15-minute intervals with the VCA profiles for
each day of the week. Moving the mouse cursor over the table
displays the time below it. This aids orientation.
1.
Click the profile to link in the
Time periods
field.
2.
Click in a field in the table, hold down the mouse button
and drag the cursor over all the periods to be assigned to
the selected profile.
3.
Use the right mouse button to deselect any of the intervals.
4.
Click
Select All
to link all time intervals to the selected
profile.
5.
Click
Clear All
to deselect all of the intervals.
6.
When finished, click
Set
to save the settings in the device.
12.3.2
Holidays
Define holidays on which a profile should be active that are
different to the standard weekly schedule.
1.
Click the
Holidays
tab. Any days that have already been
selected are shown in the table.
2.
Click
Add
. A new window opens.
3.
Select the desired date from the calendar. Select several
consecutive calendar days by holding down the mouse
button. These will later be displayed as a single entry in the
table.
4.
Click
OK
to accept the selection. The window closes.
5.
Assign the individual holidays to the VCA profiles, as
described above.
