Camera Browser Interface
Recording | en
63
Bosch Security Systems
Software manual
AM18-Q0649 | v5.8 | 2013.06
10.1.3
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media
list, activated, and configured for
storage.
Note:
A iSCSI target storage device can only be associated with one
user. If a target is being used by another user, ensure that the
current user no longer needs the target before decoupling that
user.
1.
In the
Storage overview
section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives.
–
The medium is added as a target in the
Managed
storage media
list.
–
Newly added media is shown as
Not active
in the
Status
column.
2.
Click
Set
to activate all media in the
Managed storage
media
list.
–
The
Status
column shows all media as
Online
.
3.
Check the box in the
Rec. 1
or
Rec. 2
column to specify the
recording tracks to be recorded on the target selected.
10.1.4
Formatting storage media
All recordings on a storage medium can be deleted at any time.
Check the recordings before deleting and back-up important
sequences on the computer's hard drive.
1.
Click a storage medium in the
Managed storage media
list
to select it.
2.
Click
Edit
below the list.
3.
Click
Format
in the new window to delete all recordings in
the storage medium.
4.
Click
OK
to close the window.
10.1.5
Deactivating storage media
A storage medium in the
Managed storage media
list can be
deactivated. It is then no longer used for recordings.
