Camera Browser Interface
Recording | en
67
Bosch Security Systems
Software manual
AM18-Q0649 | v5.8 | 2013.06
10.2.3
Alarm recording
Select a period for the
Pre-alarm time
from the list box.
Select a period for the
Post-alarm time
from the list box.
Alarm stream
Select the stream to be used for alarm recordings:
–
Stream 1
–
Stream 2
–
I-frames only
Check the
encoding interval and bit rates from profile:
box
and select an encoder profile to set the associated encoding
interval for alarm recording.
Check the
Export to account
box to send standard H.264 files
to the target whose address is displayed.
If an target has not yet been defined, click
Configure accounts
to jump to the
Accounts
page where the server information can
be entered.
Alarm triggers
Select the alarm type that is to trigger an alarm recording:
–
Alarm input
–
Analysis alarm
–
Video loss alarm
Select the
Virtual alarm
sensors that are to trigger a recording,
via RCP+ commands or alarm scripts, for example.
10.3
Maximum Retention Time
Recordings are overwritten when the retention time entered
here has expired.
Enter the required retention time in days for each
recording track.
Make sure that the retention time does not exceed the available
recording capacity.
