Bosch FLEXIDOME corner 9000 MP Software Manual Download

Page: 69 / 108

Camera Browser Interface

Recording | en

Bosch Security Systems

Software manual

AM18-Q0649 | v5.8 | 2013.06

Click

. The selection is removed from the table and the

window is closed.

Repeat for any other dates to be deleted.

10.4.3

Profile names

Change the names of the recording profiles listed in the

Time

periods

box.

Click a profile.

Click

Rename

Enter the new name and click

Rename

again.

10.4.4

Activate recording

After completing configuration, activate the recording schedule

and start scheduled recording. Once activated, the

Recording

Profiles

and the

Recording Scheduler

are deactivated and the

configuration cannot be modified. Stop scheduled recording to

modify the configuration.

Click

Start

to activate the recording schedule.

Click

Stop

to deactivate the recording schedule.

Recordings that are currently running are interrupted and

the configuration can be modified.

10.4.5

Recording status

The graphic indicates the recording activity. An animated

graphic is displayed when recording is taking place.

Summary of Contents for FLEXIDOME corner 9000 MP













































































































Search results

Summary of Contents for FLEXIDOME corner 9000 MP

Reviews:

Related manuals for FLEXIDOME corner 9000 MP

Brands by name

Popular brands

Bosch FLEXIDOME corner 9000 MP, Software Manual

Search results

Summary of Contents for FLEXIDOME corner 9000 MP

Reviews:

Related manuals for FLEXIDOME corner 9000 MP

Brands by name

Popular brands