Bosch FLEXIDOME corner 9000 MP Software Manual Download

Page: 103 / 108

Camera Browser Interface

Service | en

103

Bosch Security Systems

Software manual

AM18-Q0649 | v5.8 | 2013.06

Service

15.1

Maintenance

15.1.1

Update server

The address of the Bosch update server appears in the address

box.

Click

Check

to make a connection to this server.

Select the appropriate version for your camera to

download the firmware from the server.

15.1.2

Firmware

The camera functions and parameters can be updated by

uploading new firmware. To do this, the latest firmware

package is transferred to the device via the network. The

firmware is installed there automatically. Thus, a camera can be

serviced and updated remotely without requiring a technician

to make changes to the device on site. The latest firmware can

be obtained from your customer service center or from the

Bosch Security Systems download area.

To update the firmware:

First, store the firmware file on your hard disk (use the

update server to get the latest file).

Enter the full path for the firmware file in the field or click

Browse...

to locate and select the file.

CAUTION!

Before starting a firmware update, make sure to select the

correct upload file. Uploading the wrong files can result in the

device no longer being addressable, requiring it to be replaced.

Do not interrupt the firmware installation. Even changing to

another page or closing the browser window leads to

interruption. Interruption may lead to faulty coding of the Flash

memory. This can result in the device no longer being

addressable, requiring it to be replaced.

Summary of Contents for FLEXIDOME corner 9000 MP













































































































Search results

Summary of Contents for FLEXIDOME corner 9000 MP

Reviews:

Related manuals for FLEXIDOME corner 9000 MP

Brands by name

Popular brands

Bosch FLEXIDOME corner 9000 MP, Software Manual

Search results

Summary of Contents for FLEXIDOME corner 9000 MP

Reviews:

Related manuals for FLEXIDOME corner 9000 MP

Brands by name

Popular brands