Bosch DVR 670 Series Installation And Operation Manual Download Page 54

Page: 54 / 100

en | Configuration menu

Video Recorder 670 Series

AM18-Q0617 | v2.0 | 2012.03

Installation and Operation manual

Bosch Security Systems

6.1

Camera

Use the

Camera

menu to configure the recording set up for each of the three profiles.

Configure the settings for

Continuous

Input

, and

Motion

recording.

–

Continuous recording - the default recording mode

–

Input recording - activated upon an input contact event

–

Motion recording - activated upon a motion event

Choose an input channel to configure the settings for an individual video and audio input.

Note:

For 16-channel units, use the

ch09 to ch16

ch01 to ch08

button to display the required

cameras.

6.1.1

Camera

Figure 6.2

Camera - Camera

Use this menu to enable the video and audio inputs.

Enable

This setting enables or disables the video and corresponding audio inputs.

Name

Enter a name for the selected input. The name can be up to 16 characters long.

Covert

This setting enables or disables the hiding video from unauthorized users. When enabled

Advanced, Normal and unauthenticated Users will be shown only a blank screen, equivalent to

the camera being disabled. Administrator level users are able to view live, playback, and

archive covert video.

Audio

Enable Audio input when an audio source is connected for the specified channel.

Summary of Contents for DVR 670 Series





































































































Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands

Bosch DVR 670 Series, Installation And Operation Manual

Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands