Bosch DVR 670 Series Installation And Operation Manual Download Page 31

Page: 31 / 100

Video Recorder 670 Series

Operating instructions | en

Bosch Security Systems

Installation and Operation manual

AM18-Q0617 | v2.0 | 2012.03

Acknowledge key

–

press to acknowledge an alarm event; a red indicator light is located on the key

Camera keys (1-8/16)

–

press to see a full-screen display of the video input

–

the LED will be illuminated when the camera is recording

–

the LED will flash during an alarm on the camera

Quad key

–

press to go to quad mode

–

in quad mode, press to toggle to full screen

Sequence key

–

view cameras in sequence on full-screen or quad displays

Multi-screen key

–

press to go to different multi-screen modes

OSD key

–

press to view date/time and camera information, or date/time only

Pause key

–

press to freeze the picture

Reverse key

–

in live mode, press to start reverse playback of recordings for the displayed cameras

–

in playback mode, press to start or speed up reverse playback

–

in pause mode, press to step back one frame

Play key

–

in live mode, press to resume playback from the last selected playback position

–

in pause or fast forward/reverse modes, press to resume playback

Fast forward key

–

in live mode, press to start playback from one and a half minutes earlier

–

in playback mode, press to speed up the forward playback rate

–

in reverse playback mode, press to start forward playback

–

in pause mode, press to step forward one frame

Stop key

–

while in playback mode, press to return to live mode

5.1.2

Indicators

The indicators on the front panel display light or flash to alert of various operating conditions.

Power - lights green when the unit is powered

Network - lights green to indicate network activity

Alarm - flashes red when an alarm is detected

Record - lights red when the unit is recording video

Summary of Contents for DVR 670 Series





































































































Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands

Bosch DVR 670 Series, Installation And Operation Manual

Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands