Video Recorder 670 Series
Quick install | en
17
Bosch Security Systems
Installation and Operation manual
AM18-Q0617 | v2.0 | 2012.03
3.2
First-time use
The Quick install menu opens the first time the unit is used. Fill in the basic settings in the
three tabs to get the unit operational. The unit begins recording automatically when the Quick
install menu is closed.
To open the Quick install menu at any other time:
1.
Press the menu
key to bring up the System Control Bar.
2.
Press the menu
key again to enter the main menu.
–
The main menu appears on monitor A.
3.
Select System, then the Configuration submenu, and finally Quick install.
Navigating
Use the supplied USB mouse. Alternatively, use the following front panel keys:
–
Use the enter
key to select a submenu or item.
–
Use
the
arrow
keys
to
move through a menu or list.
–
Use the exit
key to go back or to switch off the menu.
After bootup, the unit presents the log in screen over a quad display. The default User ID is
ADMINISTRATOR, the default password is
000000
(six zeros).
3.2.1
Switching monitors
To switch the monitor A output to the HDMI connector:
1.
Remove power from the DVR.
2.
Press and hold the multiscreen
key on the front panel.
3.
Supply power to the unit.
–
The unit starts with monitor A on the HDMI connector and monitor B on the VGA
connector.
To switch the monitor A output to the VGA connector:
1.
Remove power from the DVR.
2.
Press and hold the quad
key on the front panel.
3.
Supply power to the unit.
–
The unit starts with monitor A on the VGA connector and monitor B on the HDMI
connector.
3.2.2
Restoring defaults
To restore the unit to its factory default:
1.
Remove power from the DVR.
2.
Press and hold the OSD
key on the front panel.
3.
Supply power to the unit.
–
The factory defaults are restored.
