Bosch DVR 670 Series Installation And Operation Manual Download Page 51

Page: 51 / 100

Video Recorder 670 Series

Operating instructions | en

Bosch Security Systems

Installation and Operation manual

AM18-Q0617 | v2.0 | 2012.03

Acknowledging an input alarm

Press the acknowledge

key to acknowledge the alarm.

–

The beeper is silent.

–

The alarm

indicators are no longer lit.

–

The alarm status message disappears.

–

The last-used view mode is restored.

The alarm icon remains visible as long as the input causing the alarm is active.

If an alarm is not acknowledged, the beeper switches off after the dwell time but the alarm

still needs to be acknowledged.

If auto-acknowledge is enabled, the beeper and the alarm

indicators switch off after the

dwell time.

5.11.2

Motion events

If a motion detection signal causes an event

Monitors A and B can switch to display the motion events.

–

The motion icon is displayed in the corresponding cameo. An alarm status message is

displayed.

–

The motion

indicator on the front panel flashes.

5.11.3

Video loss alarm

If the loss of a video signal causes an alarm:

Monitor A and B will show the video loss indicator.

–

Monitor A can switch to a multiscreen view. The lost camera signal is displayed as a black

cameo with the video loss message. The border around the camera with the video loss is

red. An alarm status message is displayed.

–

The alarm beeper sounds.

–

The video loss

indicator is displayed until the video signal is restored.

Acknowledging a video loss alarm

Press the acknowledge

key to acknowlede a video loss alarm.

–

The beeper is silent.

–

The alarm status message disappears.

–

The last-used view mode is restored.

If the camera with video loss is visible, the black cameo and the video loss message continue

to be displayed as long as there is no video present.

5.11.4

Multiple alarms

Monitor A can switch to a multiscreen view if more than one alarm occurs. The latest alarm

status message is always shown. Press the acknowledge

key to deactivate all alarms.

Summary of Contents for DVR 670 Series





































































































Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands

Bosch DVR 670 Series, Installation And Operation Manual

Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands