Bosch DVR 670 Series Installation And Operation Manual Download Page 26

Page: 26 / 100

en | Hardware setup

Video Recorder 670 Series

AM18-Q0617 | v2.0 | 2012.03

Installation and Operation manual

Bosch Security Systems

4.8

USB connectors

A USB 2.0 connector is located at the rear panel of the unit to which a mouse, for example,

can be connected. For convenience, the USB 2.0 port is located on the front of the unit to

connect a mouse or USB memory device. (Recording to a USB-drive is not supported.)

Figure 4.9

USB connector (on front and on rear)

Note:

USB memory sticks must have FAT32 formatting.

4.9

eSata connector

An eSata connector is located at the rear panel of the unit to connect an eSata device. This

can be used to expand the number of available hard disks.

Figure 4.10

eSata connector

Note:

The connected hard disks must be Bosch approved.

e-SATA

Summary of Contents for DVR 670 Series





































































































Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands

Bosch DVR 670 Series, Installation And Operation Manual

Search results

Summary of Contents for DVR 670 Series

Reviews:

Related manuals for DVR 670 Series

Brands by name

Popular brands