Video Recorder 670 Series
Configuration menu | en
67
Bosch Security Systems
Installation and Operation manual
AM18-Q0617 | v2.0 | 2012.03
6.5
Network
6.5.1
TCP/IP
Figure 6.16
Network - TCP/IP
1.
Enable
DHCP
to have the IP address, subnet mask, and default gateway assigned
automatically by the network server.
–
If DHCP is disabled, fill in the
IP address
, the
Subnet mask
, the default
Gateway
,
and the
Primary DNS
server address. If required, change the default
HTTP port no.
(80) to a new value.
2.
Restrict the network
Bandwidth limit
by entering a value between 256 Kbps and
100 Mbps. If 256 or 512_Kbps is selected, the DVR automatically selects I-frame only
video at 1 IPS for transmission over the low bandwidth network connection.
(A video clip is not attached to an e-mail if 256 or 512_Kbps is selected.)
3.
Enable the RTSP server to stream live video (for example, to a smart phone). If RTSP is
enabled (on), enter a TCP/IP port number (default port 554).
4.
ICMP
is set to
On
by default. Set
ICMP
to
Off
(ping is not available) if you are using
Control Center software version 3.35 or higher.
6.5.2
Streaming to mobile devices
The Real Time Streaming Protocol (RTSP) feature allows live video streaming over the
network.
Attention:
If you enable this feature (RTSP server to On) and the firewall on a ADSL router is opened,
anybody can view the cameras. There is no log-on user ID or password to protect a camera
live image.
6.5.3
Connecting using a smart mobile phone
Your smart phone should support RTSP network protocol and includes a RTSP capable player
application that can display H.264 video streams. The RTSP transports the remote (network)
