Bosch DECT6000, Installation Instructions Manual

Page: 22 / 48

2. Connect the optional ACU-PABX connection cable LBB 6721/03 to the
PABX connection of the DCU and the wires via a terminal strip to the PABX.
For wiring of the ACU-PABX connection cable see Table 6.3.
6.3.3 Software configuration of the ACU
Note
After installing and wiring the ACU card the software configuration has
to take place. This has to be done by use of the software installed on
the Alphadesk central control PC, described in the instructions for use of
the LBB 6511/00.
CHAPTER 6
Installation Instructions
18 DECT6000
9922
141
80271
03-07
en
Pin Signal Wire colour Line Pin Signal Wire colour Line
14 a white/blue
0
20 a white/grey
4 1 b blue/white 7 b grey/white
2 earth red/grey 8 earth black/blue
15 a white/orange
1
21 a red/blue
5 3 b orange/white 9 b blue/red
16 earth black/orange 22 earth red/brown
17 a white/green
2
23 a red/orange
6 4 b green/white 10 b orange/reg
5 earth grey/red 11 earth blue/black
18 a white/brown
3
24 a red/green
7 6 b brown/white 12 b green/red
19 earth orange/black 25 earth brown/red
13 Not connected
Table 6.3 Connections of the ACU-PABX connection cable (LBB 6721/03)