Bosch DECT6000, Installation Instructions Manual

Page: 35 / 48

9.3 Installation
9.3.1 Mounting procedure
Repeaters are normally mounted on the wall, close to a wall socket (the length of the
power supply cable being approx. 3 m).
To mount a repeater, proceed as follows (see figure 9.4):
1. Mark the drill spots on the wall.
2. Drill two holes of 6 mm.
3. Mount the supplied plugs.
4. Pull the power supply cable through the orifice in the wall holder .
Make sure to leave enough cable length to facilitate (dis)mounting of the repeater.
5. Mount the wall holder using the screws provided.
The repeater can now simply be attached to the wall holder (push down and click
in position).
CHAPTER 9
Installation Instructions
DECT6000
31
9922
141
80271
03-07
en
50 mm
2 3
4
1
Figure 9.4 Mounting a repeater