9.3.2 Wiring
Connecting the repeater
After mounting the repeater on the wall, it must be connected to the power supply cable
delivered with the repeater.
Proceed as follows (see figure 9.5):
1.
Insert the plug into the line connector
of the repeater
.
2.
Insert the adapter
into the wall socket.
The inset in fig. 9.5 shows the connections of the RJ11 connector of the power supply
cable.
9.3.3 Technical data of the power supply
Input voltage:
230 Vac/50 Hz, 60 mA, 12W
Output voltage:
2 x 9 Vdc, 300 mA
CHAPTER 9
Installation Instructions
32
DECT6000
9922
141
80271
03-07
en
1
2
GND
+9V
3
Figure 9.5 RJ11 connector of the power supply
Summary of Contents for DECT6000
Page 1: ...DECT6000 System Installation Instructions en ...
Page 2: ......
Page 46: ......
Page 47: ......
