manualshive.com logo in svg

Bosch DDU 9, Manual, Page: 15 / 148

Share
Download
Bosch DDU 9 Manual Download Page 15

Technical Data | 5

Bosch Motorsport

DDU 9

15 / 148

5 Technical Data

The display DDU 9 integrates a programmable full color dashboard display with a data

logging system for motorsport applications for a very competitive price. Additional input

devices can be connected via Ethernet and CAN buses.

Data Analysis Software WinDarab is available free of charge as “WinDarab V7 free” on our

website. A basic logging function of 100 channels with recording of 50 ms (3 GB) is always

included. The logger can be upgraded to full logging performance (max. 1 ms). In addition

a 2

nd

 logging partition of 1 GB (e.g. for long term recording) can be activated.

Customers can implement own graphics, pictures etc. on the 12 freely configurable dis-

play pages. For quick data transfer from the car e.g. during pit stop, data copy to a USB

stick is available as an option. The stick is connected to the wiring harness for the DDU 9.

The device comes with 4 analogue and 4 speed inputs as standard; further 12 analogue

inputs are available as optional upgrade.

Display

– 5.7” graphic color display

– 12 user configurable display pages

– 10 multicolor freely configurable (RGB) LEDs

Resolution

640 x 480 pixel

Supported image file formats

Bmp, gif, jpg, png, tif

Processor

667 MHz Dual Core

Converters

8 kHz AD converters with digital low pass

filter

Internal power source

Li/Ion capacitor

Configurable math channels

User configurable CAN in/out messages

Sampling rate

50 ms (standard), 

max. 1 ms (optional)

Online data compression

Logging rate

Max. 600 kB/s

Recording channels

100 channels (standard),

up to 1,040 in total (optional)

Logged data download speed

Max. 1,000 kB/s

Internal storage capacity

3 GB (standard), 

plus 1 GB (optional)

LTE Ethernet telemetry support, GSM telemetry support

RS232 for GPS and telemetry

CCP-Master, data acquisition from ECU that support CAN calibration protocol (optional)

Mechanical Data

Size

151 x 126 x 33.5 mm

Weight

540 g

Protection Classification

IP54 to DIN 40050, Section 9, Issue 2008

Operating temperature internal

-20 to 85°C

Operating temperature Display

-20 to 70°C

Summary of Contents for DDU 9





















































































































































Reviews:

No comments