DICENTIS
Mechanical installation of Contribution Devices | en
59
Bosch Security Systems B.V.
Hardware Installation Manual
2021.01 | V2.2 |
Connecting DICENTIS devices
The DICENTIS Conference System can be quickly and easily configured as a daisy‑chain
configuration or as a star configuration:
–
Daisy‑chain configuration
: Uses dedicated cabling, consisting of CAT‑5e cables including
two additional power conductors (see
Typical system setup, page 10).
–
Star configuration
: Each DICENTIS device is connected with an individual standard
CAT‑5e cable. An Ethernet switch is also required for providing Power over Ethernet
(PoE).
i
Notice!
When Power over Ethernet is used, DICENTIS devices cannot be daisy‑chained.
The star configuration makes use of connectors underneath the devices, ensuring for a neat,
tidy system installation, especially advantageous for TV coverage.
To connect the system network cables to the DICENTIS devices (refer to the following figure):
1.
Insert the system network cable/connector (
2
).
2.
Lead the system network cable through the cable guides (
3
).
Installing DICENTIS devices
The DICENTIS devices can be free-standing or fixed in more permanent installations using
mounting screws.
1.
The distance between the centres of the screw inserts (
1
) on the bottom is 100 mm.
2.
Use M4 type of screws with a device screw insert length of maximum 5 mm when
attaching the device to the bottom of the recess (
1
).
Figure 7.3:
Bottom view discussion DICENTIS devices (DCNM-MMD / DCNM-MMD2)
Summary of Contents for DCNM-APS2
Page 1: ...DICENTIS Conference System en Hardware Installation Manual ...
Page 2: ......
Page 79: ......
