DICENTIS
Installation material and tools | en
33
Bosch Security Systems B.V.
Hardware Installation Manual
2021.01 | V2.2 |
C
B
A
Figure 5.1:
Screw max dimensions
Flat head
A
8 mm
B
2 mm
C
2.5 mm
5.1.1
Using a cable coupler to extend a cable
The DICENTIS Cable coupler can be used to extend cables, as it allows you to connect
DICENTIS Cable assemblies together. This way, it is possible to connect, for example, three 25
m (DCNM-CB25-I) cables together to form a 75 m cable.
Note
:
–
The cable length is not allowed to exceed 100 m.
–
No more than 2 cable couplers can be used in one trunk.
5.1.2
Using a cable coupler as a break-out box
The DICENTIS Cable coupler can be used in a floor pod as a break-out box, for example, if you
want to connect temporary devices like a rostrum microphone. The cable coupler can be
fixated using the screw holes (2.5 mm) or via a tie wrap through the recessed area.
Note
:
–
The cable length is not allowed to exceed 100 m.
–
No more than 2 cable couplers can be used in one trunk.
Summary of Contents for DCNM-APS2
Page 1: ...DICENTIS Conference System en Hardware Installation Manual ...
Page 2: ......
Page 79: ......
