144
en | Configuring the AutoDome Junior HD
AutoDome Junior HD
F.01U.275.803 | 6.0 | 2012.11
Installation Manual
Bosch Security Systems, Inc.
1.
In the
Recording media
section, click the
iSCSI Media
and
Local Media
tabs to display the applicable storage media
in the overview.
2.
In the
Storage overview
section, double-click the required
storage medium, an iSCSI LUN or one of the other
available drives. The medium is then added to the
Managed storage media
list. In the
Status
column, newly
added media are indicated by the status
Not active
.
3.
Click the
Set
button to activate all media in the
Managed
storage media
list. In the
Status
column, these are
indicated by the status
Online
.
4.
Check the box in the
Rec. 1
or
Rec. 2
to specify which data
stream should be recorded on the storage media selected.
Rec. 1
stores Stream 1,
Rec. 2
stores Stream 2. This
means that you can record the standard data stream on a
hard drive and record alarm images on the mobile CF card,
for example.
5.
Check the boxes for the
Overwrite older recordings
option to specify which older recordings can be
overwritten once the available memory capacity has been
used.
Recording 1
corresponds to Stream 1,
Recording 2
corresponds to Stream 2.
CAUTION!
If older recordings are not allowed to be overwritten when the
available memory capacity has been used, the recording in
question will be stopped. You can specify limitations for
overwriting old recordings by configuring the retention time
(see
Section 12.33 Retention Time, page 148
).
