Bosch AutoDome Junior HD VJR Series Installation Manual Download Page 80

Page: 80 / 194

en | Preparing the Wiring

AutoDome Junior HD

F.01U.275.803 | 6.0 | 2012.11

Installation Manual

Bosch Security Systems, Inc.

8.2.2

Power Connections to Heater (all outdoor models)

The heater in an outdoor AutoDome Junior HD unit accepts

power only from a single 24 VAC isolated power connector

(white/red and white/black wires). The heater does not accept

power via Power over Et (PoE+, IEEE 802.3at, class 4).

Figure 8.2

Power Cable

To connect the power to outdoor unit heaters:

Locate the cable assembly with a three (3) pin mating

connector on one end and the white/red and white/black

flying leads on the other end.

Connect one lead of the ground or 24 VAC power source to

the white/black wire.

Connect one lead of the 24 VAC power source to the

white/red wire.

Ref. # Wire

Color

24 VAC

White/Red

24 VAC

White/Black

User-supplied Power Supply

n/a

WARNING!

The heater unit accepts 24 VAC, 2 A power only. Do not connect

120 V or 230 V to this heater.

Summary of Contents for AutoDome Junior HD VJR Series



































































































































































































Search results

Summary of Contents for AutoDome Junior HD VJR Series

Reviews:

Related manuals for AutoDome Junior HD VJR Series

Brands by name

Popular brands

Bosch AutoDome Junior HD VJR Series, Installation Manual

Search results

Summary of Contents for AutoDome Junior HD VJR Series

Reviews:

Related manuals for AutoDome Junior HD VJR Series

Brands by name

Popular brands