Bosch AutoDome Junior HD VJR Series Installation Manual Download Page 107

Page: 107 / 194

AutoDome Junior HD

Using the IP Interface | en

107

Bosch Security Systems, Inc.

Installation Manual

F.01U.275.803 | 6.0 | 2012.11

Bookmarks

In addition, you can set markers in the sequences, so-called

bookmarks, and leap directly to these. These bookmarks are

indicated as small yellow arrows above the time interval. Use

the bookmarks as follows:

Jump to the previous bookmark

Set bookmark

Jump to the following bookmark

NOTICE!

Bookmarks are only valid while you are in the PLAYBACK page;

they are not saved with the sequences. As soon as you leave the

page all bookmarks are deleted.

Summary of Contents for AutoDome Junior HD VJR Series



































































































































































































Search results

Summary of Contents for AutoDome Junior HD VJR Series

Reviews:

Related manuals for AutoDome Junior HD VJR Series

Brands by name

Popular brands

Bosch AutoDome Junior HD VJR Series, Installation Manual

Search results

Summary of Contents for AutoDome Junior HD VJR Series

Reviews:

Related manuals for AutoDome Junior HD VJR Series

Brands by name

Popular brands