16
Robert Bosch Hausgeräte GmbH
en
Bowl with accessories/tools
Warning!
When working with the bowl, the appliance
cannot be switched on until the bowl has
been attached and the lid has been attached
and screwed on tight.
Universal blade
for cutting, mincing, mixing.
Kneading hook
for kneading dough and mixing-in
ingredients that ought not be cut
(e.g. raisins and chocolate chips).
Chopping disc
for cream, egg white and
mayonnaise.
Fig.
Attach the bowl (arrow on bowl on dot
on the appliance) and rotate as far as
possible in a clockwise direction.
Insert tool holder into the bowl.
Insert universal blade, whisking disc or
kneading hook into the tool holder and
release.
Note position of the tools when inserting
them! Press tools all the way down.
Warning!
Do not add ingredients until the tools have
been inserted.
Add ingredients.
Attach lid with pusher (match arrow on lid
on dot on bowl) and rotate in a clockwise
direction. Lid lug must be located fully in
the slot in the bowl handle.
Insert the mains plug.
Set the rotary switch to the desired
setting.
To add more ingredients, set the rotary
switch to 0/off.
Remove the pusher and add ingredients
through the feed tube. Pusher can be
used as a measuring cup.
Cutting discs
Slicing reversible disc – thick/thin
for slicing fruit and vegetables.
Process at setting 1.
Identification on the reversible slicing disc:
“coarse” for the thick cutting side, “fine” for the
thin cutting side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or chocolate.
Slice boiled, waxy potatoes only when they
are cold.
Shredding reversible disc –
coarse/fine
for shredding vegetables, fruit
and cheese, except for hard cheese
(e.g. Parmesan).
Process at setting 1.
Designation on the reversible shredding disc:
“2” for the coarse shredding side
„4“ for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only at setting 2.
Reversible slicing/shredding disc
for slicing and shredding fruit,
vegetables and cheese.
Process at setting 2.
Fig.
Attach the bowl (arrow on bowl on dot on
the appliance) and rotate as far as
possible in a clockwise direction.
Insert tool holder into the bowl.
Depending on the required use:
Place cutting disc on tool holder. Turn
required slicing/shredding side face up.
Place disc on the disc holder so that the
drivers on the tool holder grip the opening
in the discs.
m
Risk of injury from the rotating tools!
While the appliance is operating, never
place fingers in the mixing bowl. Always
use the pusher for adding ingredients.
After switching off, the drive continues
running for a short time. Change tools
only when the drive is at a standstill.
m
Risk of injury from sharp blades!
Do not touch blades of the universal blade
with bare hands. When not in use, always
store the universal blade in the blade
guard. Grip the universal blade by the
edge of the plastic handle only.
m
Risk of injury from sharp blades!
Do not grip the sharp blades or edges of
the cutting discs. Take hold of discs by the
edge only! Do not place fingers in the feed
tube. Only use the pusher when adding
more ingredients.
MCM3_alle.book Seite 16 Donnerstag, 12. Februar 2015 4:40 16
Robert Bosch Hausgeräte GmbH
17
en
Attach lid with pusher (match arrow on lid
to arrow on bowl) and rotate in a clock-
wise direction. Lid lug must be located
fully in the slot in the bowl handle.
Insert the mains plug.
Set the rotary switch to the desired
setting.
Fill with contents which are to be sliced
or shredded.
When adding contents which are to
be sliced or shredded, apply only light
pressure to the pusher. Remove the
pusher and add ingredients through
the feed tube.
Warning!
Empty the bowl before it becomes so full
that the cutting or grating contents reach
the carrier disc.
After using the appliance
Set the rotary switch to 0/off.
Remove mains plug.
Rotate the lid in an anti-clockwise
direction and remove.
Remove tool:
– Take tool holder together with
universal blade, whisking disc or
kneading hook out of the bowl.
Remove the tools from the tool holder.
– Take out the cutting discs by the
plastic stud in the centre. Take tool
holder out of the bowl.
Rotate bowl anti-clockwise and remove.
Clean all parts, see “Cleaning and
servicing”.
Blender
Blade insert with blender/cutting blade for
mixing liquid or semi-solid food, for cutting/
chopping raw fruit and vegetables, for
puréeing food.
Warning!
Blender may be damaged. Do not process
deep-frozen ingredients (except ice cubes).
Do not operate blender when empty.
Fig.
Place seal on the blade insert. Ensure
that the seal is positioned correctly.
Insert blade insert with blender/cutting
blade into the blender jug and lock
anti-clockwise ( ).
Turn blender jug over (blade insert face
down).
Attach the blender jug (match arrow on
the jug to the arrow on the appliance) and
rotate as far as possible in a clockwise
direction.
Add ingredients.
Maximum capacity, liquid = 1.0 litres
(frothing or hot liquids max. 0.4 litres).
Optimal processing capacity – solids =
80 g.
Attach lid and press firmly.
Hold lid while working.
Insert the mains plug.
Set the rotary switch to the desired
setting.
To add more ingredients, set the rotary
switch to 0/off.
Remove the lid and add ingredients
or
remove the funnel and gradually add solid
ingredients through the refill opening
or
pour liquid ingredients through the funnel.
After using the appliance
Set the rotary switch to 0/off.
Remove mains plug.
Rotate the blender in an anti-clockwise
direction and remove.
Remove lid.
m
Risk of injury from sharp blades/
rotating drive!
Never place fingers in the attached
blender!
Do not remove/attach the blender until the
drive is at a standstill.
Do not touch blades of the blade insert
with bare hands. Clean them with a brush.
m
Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a max.
0,4 litres of hot or frothing liquid.
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
MCM3_alle.book Seite 17 Donnerstag, 12. Februar 2015 4:40 16
16
