Bosch 3 842 998 760 Assembly Instructions Manual Download Page 31

Page: 31 / 56

Installation 31/56

3 842 358 796/2015-01, MIT: HD 2/H,

Bosch Rexroth AG

7.5.8

Make the pneumatic connection to the product

WARNING

High pneumatic pressure!

Risk of serious injury and even death.



Deactivate the compressed air supply to the relevant system component before

making the pneumatic connection to the product, installing, or disassembling it.



Secure the system against unintentional restarting.

CAUTION

Unintentional rapid rotational movements, falling objects



Risk of injury caused by unintentional rapid rotational movements and falling

objects.



Make sure that the rotating cylinder is in its original position and under pressure

(exhaust air) before commissioning/re-commissioning and in particular before

each restart of the system after shutdown, malfunction, breaks, shift changes or

rest periods.

• For the speciﬁ cation of the compressed air and the operating pressure, see page 54.

Fig. 18:

358 732-26

SW4

Open inspection openings



Remove the covers of the

inspection openings (C)

and connect the HD 2/H

to the compressed air

supply.

Loosen the screws

Pull the cover upwards

Remove the cover (C).

GLISH

358732_2015_01_EN.indd 31

29.05.2015 08:32:56

Summary of Contents for 3 842 998 760

























































Search results

Summary of Contents for 3 842 998 760

Reviews:

Related manuals for 3 842 998 760

Brands by name

Popular brands

Bosch 3 842 998 760, Assembly Instructions Manual

Search results

Summary of Contents for 3 842 998 760

Reviews:

Related manuals for 3 842 998 760

Brands by name

Popular brands