22/56 Installation
Bosch Rexroth AG
, MIT: HD 2/H, 3 842 358 796/2015-01
Fig. 9:
F
358 732-19
11
11
SW13
M
D
= 25Nm
9
7
SW13
M
D
= 25Nm
SW13
4x
M
D
= 25Nm
10
10
8
=
=
=
=
Adjust lift rotate unit HD 2/H size 2 and 3 in section ST 2 (example shown here size 2 180°)
7.
Install the HD 2/H on
the mounting frame
from above (observe the
markings).
8.
Adjust the position of
the base plate between
the conveyor sections.
9.
Tighten down the collar
nuts.
10.
Remove the eye bolts
11.
With size 3 ensure
that the additional
supports are installed
(mandatory).
For size 2 with loads of
> 50 kg.
For
size 2:
3 842 993 324
For
size 3:
3 842 993 325
NOTICE
Improper adjustment can
result in property damage
The product can be
damaged; the service life
may be adversely affected.
During commissioning
the angle of rotation
must be checked
and precisely set Not
performing this work
may result in the
lift rotate unit being
damaged or cause
premature wear. See
chapter 8.4 “Check
and adjust the rotation
angle of the lift rotate
unit” on page 37.
358732_2015_01_EN.indd 22
358732_2015_01_EN.indd 22
29.05.2015 08:32:54
29.05.2015 08:32:54
