40
SM_150707_A
Service Manual IDYLLE since year 2014
4
5
5
Lock the cartridge cap with the 26mm open end wrench.
Unscrewing the nut under the cap.
Unscrew the cap.
Screw the nut to remove it from the shaft.
Take the cartridge off the vise block.
Tool(s) required :
-
32mm open end wrench
-
13mm open end wrench
Hold the hydraulic stop piston with a 16mm open ends wrench.
Unscrew the counter nut under the piston with a 14mm open ends wrench.
Save the position of the lock ring on the shaft and remove it.
Remove the piston and nut from the shaft.
Dry clean the threads to remove the Loctite.
Tool(s) required :
-
16mm open ends wrench
-
14mm open ends wrench
Open the cartridge:
-
Pull the rebound transmission
-
Push the shaft through the cartridge
-
Grab back the shaft and extract it from the cartridge
Clean, inspect and store the parts.
Tool(s) required :
-
n/a (by hand)
1
2
3
1
2
3
1
2
3
4
INFORMATION
Changing the height of the piston will modify its effect. The highest you place
the lock ring, the less effect the hydraulic stop will have.