BOS Suspension IDYLLE 2014 Service Manual Download | Manualshive

Page: 3 / 51

background image

1

SM_150707_A

Service Manual IDYLLE since year 2014

BOS MTB offers warranty on its products on the following terms:

BOS MTB guarantees to the original purchaser that the BOS product for which they received
this warranty is free from defects in material and workmanship for one year from the date of
original retail purchase. A proof a purchase will be asked for any warranty claim. This warranty
is not transferable to a subsequent purchaser.

Wear and tear parts such as dust seals, O-rings, bushings, rear shock mounting hardware,
stanchions, threaded parts and bolts are not covered under this warranty.

Terms

This warranty is subject to legal jurisdictional or warranty rights of the country where it has
been originally purchased, which will prevail if different from the terms herein listed.

Limits

BOS MTB cannot be liable for any loss, inconvenience damages, whether direct, incidental,
consequential, resulting from the use of its products, local legislation prevailing.

Warranty exclusions

This warranty does not cover the following cases:

• Damage to products resulting from improper assembly other than listed below

• Products that have been modified by the owner or a third party

• Improper use

• Damages resulting from an accident, crash under any circumstances

• Invalid servicing procedures and servicing time frame not respected

• Replacement of the original parts by parts from others manufacturers

• Products whose serial numbers has been altered, defaced or removed.

Warranty procedure

The owner should always refer to an approved BOS center for any warranty claim. A proof a
purchase is compulsory for any warranty claim. Otherwise the warranty claim will not be
considered. Always contact BOS MTB warranty department before returning any products that
may fall under this warranty. If “the faulty parts” do not fall under warranty, the customer will
be charged for any costs in respect with warranty such as transport and package back and forth.

BOS S.A.R.L. Warranty

«
1
2
3
4
5
...
»

Summary of Contents for IDYLLE 2014




















































Reviews:

No comments

Related manuals for IDYLLE 2014

Brand: Wallenstein Pages: 31

Brand: Zipp Pages: 39

Wireless Temperature/Humidity Station

Brand: DAVIS Pages: 8

Brand: e-motion Pages: 2

Brand: E-Lux Pages: 36

Brand: quadient Pages: 2

AcousticDesign AD-S52

Brand: QSC Pages: 4

Brand: Wallbox Pages: 7

Brand: Rice Lake Pages: 2

Brand: Viking Pages: 5

Efector200 OJ51 Series

Brand: IFM Pages: 8

Brand: babyplus Pages: 36

Brand: Globalsat Pages: 2

TRANCE X ADVANCED SL 0

Brand: Giant Pages: 1

Brand: Spiral Audio Pages: 2

Brand: Nauticam Pages: 2

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Presrv PRB24C01ABSG

Brand: Zephyr Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands