Bort 93412871, Manual

Page: 12 / 36

12
between 50 and 60 Hz . The product adapts itself for both
50 and 60 Hz .
CLEANING AND STORAGE
• Always turn off the product before disconnecting it
from the power supply .
• Do not pull the power plug out of the electrical outlet
by the power cord . Do not wrap the power cord around
the product .
• Protect the product, its power cord and power plug
against dust, direct sunlight, dripping and splashing wa-
ter .
• Store the product in a cool, dry place, protected from
moisture and out of the reach of children .
• Protect the product against heat . Do not place the
product close to open flames or heat sources such as
stoves or heating appliances .
Before first use
Remove all packaging materials . Check if all parts are
complete .
ACCESSORIES AND AREAS OF APPLICATION
Accessory Function
Puller (8)
For cleaning windows,
mirrors, and other smooth
surfaces .
Move the puller from top to
bottom .
Upholstery nozzle (9)
To disperse the flow of
steam over a wider area for
more gentle cleaning .
Cotton cover (10)
Designed to absorb excess
moisture . The cotton cover
also helps to prevent
water spotting . This allows
an effective steaming of
fabrics and upholstery .
Extension hose (12)
Useful for hard-to-reach
areas .
Angle nozzle (14)
For precision cleaning of
items with hard-to-reach
areas (faucets, sinks, etc .) .
Extension nozzle (15)
Useful for hard-to-reach
areas .
Round brush (16)
For scrubbing especially
tough stains . Ideal to use
on ceramic tile, grouting,
and other similar surfaces .
ASSEMBLY
Accessory Assembly
Puller (8)
Fit the hooks (at the back of
the puller 8 ) into the slots
of the upholstery nozzle 9 .
Press the puller 8 against
the upholstery nozzle 9
until locked .
Upholstery nozzle (9)
Extension hose (12)
Extension nozzle (15)
Attach the intake to the
steam outlet 1 of the
product/extension hose 12 .
Screw in a clockwise
direction until tight .
Хлопковый чехол (10)
Fix on the upholstery
nozzle 9 .
Angle nozzle (14)
Round brush (16)
Attach the intake to the
steam outlet 1 of the
product, extension hose 12
or extension nozzle 15 .
Dismount all the accessories in a reverse order .
Operation
Filling the water tank
DANGER! Risk of electric shock! Before filling
the water tank 2 : Disconnect the power plug 7
from the mains socket .
CAUTION! Fill the water tank 2 with tap water
or distilled water without any additives .
If your tap water is hard: Use distilled water . If your tap
water is moderately hard: Mix distilled water and tap wa-
ter (ratio of 1:1) .
NOTES:
As long as there are steam and pressure in the water tank
2 you cannot open the safety valve 3 . To open the water
tank:
– Release steam or
– wait until the product has cooled down .
Do not exceed the water tank’s 2 maximum fill capacity
of 250 ml .
Slowly open the safety valve 3 . Before fully opening, wait
a few seconds until the steam stops hissing .
Use the measuring cup 13 and the funnel 11 to fill the
water tank 2 through the water inlet 2 . Close the safety
valve 3 .
TURNING ON/OFF
• Connect the power plug 7 to a suitable mains socket .
The power indicator 18 lights up . The product starts to
produce steam immediately .
• The product is ready to use when the steam indicator
17 lights up .
• Turning off the product: Disconnect the product from
the mains socket .
NOTES:
The product takes around 3 minutes to preheat . The
product has to be unplugged
– after use,
– before cleaning, and