NOTICE!
There is a danger of considerable material damage if the
limits are not complied with!
Failure to comply with the limits can cause permanent damage to
the Börger machine and its components.
— The values may neither exceed nor fall below the limits speci-
fied in
Chapter 3.3 “Technical data” on page 49
specifications on the data sheet.
— On Börger machines that operate with a frequency converter,
make sure that the operating speed is sufficiently below the
maximum permissible speed (for speed limit based on
machine configuration, see enclosed data sheet).
— Take all necessary precautions to ensure that the permissible
differential pressure between the inlet and outlet of the Börger
machine is not exceeded.
— Make sure that the pressure on the outlet does not exceed the
permissible pressure of the pipe system and the Börger
machine, and not overload the drive and its elastic connec-
tions.
— The temperature values according to the data sheet may not
exceed or fall below the limits. Double-check this.
NOTICE!
Risk of severe material damage caused by running a Börger
machine against closed valves!
Running against closed valves may cause permanent damage to
your Börger machine.
— The Börger machine must not be run against closed valves.
— Make sure that the pipes are open when the Börger
machine is switched on, e.g. by a suitable control unit.
Limits
Closed valves
Operation
BA-Classic FL_en-US, 03.05.2018
www.boerger.de / www.boerger.com
87