manualshive.com logo in svg

Borger Classic FL 1036, Operating Manual, Page: 186 / 204

Share
Download
Borger Classic FL 1036 Operating Manual Download Page 186

9.7.2 

EU Declaration of Incorporation

EU Declaration of Incorporation

Börger GmbH | Benningsweg 24 | 46325 Borken-Weseke | Germany

We hereby declare that the following products:

Product description:

Rotary lobe pump

Product line:

BLUEline

Type descriptions:

AL, PL, CL, FL, FLA, EL, XL

Version:

Classic, Select, Protect

Serial number:

from 16XX XXXX – 1.X

Year of manufacture:

from 2017

are in compliance with the requirements of the 

Machinery Directive (2006/42/EC)

: Annex I, para. 1.1.2, 1.1.3, 1.1.5,

1.3.2, 1.3.4 and 1.5.1.

The incomplete machine is further in compliance with all provisions of the 

Electrical Equipment (2014/35/EU) 

and

Electromagnetic Compatibility (2014/30/EU) 

Directives.

The incomplete machine may only be put into operation when it has been determined that the machine in which the
incomplete machine is to be installed is in compliance with the provisions of the Machinery Directive (2006/42/EC).

The manufacturer is obligated to electronically submit the specific documentation for the incomplete machine to the
authorities of individual member states upon request.

The specific technical documentation associated with the machine has been created in accordance with Annex VII Part
B.

Name and address of the authorized representative: Ansgar Riers - Börger GmbH

Borken-Weseke,

Town / city

1/11/2017

Date

Alois Börger - Managing Director

Appendix

BA-Classic FL_en-US, 03.05.2018

www.boerger.de / www.boerger.com

186

Summary of Contents for Classic FL 1036













































































































































































































Reviews:

No comments