Personnel:
n
Mechanics
n
Qualified electricians
Protective equip-
ment:
n
Occupational safety clothing, chemical
resistant
n
Safety shoes
n
Safety gloves, chemical-resistant
n
Safety goggles
Special tool:
n
Tools, general
— Read and follow the safety instructions detailed in
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30
.
— To the extent necessary, amply secure the surrounding area
when performing maintenance. Cordon off the working area
with a red and white safety chain and a warning sign.
— Open the quick-release cover in accordance with
6.3.2 “Opening and closing the quick-release cover”
on page 125
.
1.
Consult the operating manual from the drive manufacturer for
details on checking the direction of rotation. With three-stage
gear units, the motor must turn in the opposite direction for
example (when looking at the drive). This is different from
two-stage gear units which are used as an example here.
2.
Check the direction of rotation of the drive shaft, for example,
by briefly switching on the motor and observing the fan wheel
of the motor.
3.
If the direction of rotation and therefore the flow direction are
incorrect, change the direction of rotation of the drive or
switch the PTO shaft for versions with two drive shafts.
4.
Mark the selected flow direction on the Börger machine using
the adhesive label provided.
5.
Special drives
Make sure the direction of rotation of the drive shaft for the
required flow direction is correct according to the function
description above as described in the operating manual of the
drive manufacturer.
6.
Close the quick-release cover as described in
6.3.2 “Opening and closing the quick-release cover”
on page 125
.
Transportation, Storage and Installation
BA-Classic FL_en-US, 03.05.2018
www.boerger.de / www.boerger.com
85