6.
In each case, unscrew the rotating seal holding bush (2)
using the special tool (
M
) and pull it off the shaft.
7.
Remove the seal face (4) with O-ring (5) out of the corre-
sponding rotating seal holding bush (2).
8.
Remove the seal faces (4) with O-rings (5) out of the sta-
tionary seal holding bushes (8) remaining in the Börger
machine using a suitable tool (e.g. screwdriver).
9.
Clean the O-ring seats with a suitable agent that is compat-
ible with the seal material, quench fluid and medium, e.g.
alcohol-based industrial cleaner.
10.
Thoroughly clean all parts and the working chamber of the
machine before reinstalling removed parts.
11.
Check all removed parts for wear and only reuse them if they
are undamaged.
Maintenance and Repairs
BA-Classic FL_en-US, 03.05.2018
www.boerger.de / www.boerger.com
151